Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Gate Hinge Repair: Fixing Sagging or Broken Hinges

Gate hinge repair starts with finding what failed: loose screws, a bent leaf or rust, then matching the replacement hinge to the gate.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Gate Hinge Repair: Fixing Sagging or Broken Hinges
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1D&D TruClose Gate HingeD&D TruClose Gate Hinge9.6/10View on Amazon
  2. 2Insaga 6mm Gate HingesInsaga 6mm Gate Hinges9.5/10View on Amazon
  3. 3SparkSway Chain Link HingesSparkSway Chain Link Hinges9.5/10View on Amazon
  4. 4WENHUALI Wall Mount HingesWENHUALI Wall Mount Hinges9.4/10View on Amazon

A gate hinge that has rusted through or pulled its screws out leaves the gate sagging, and gate hinge repair starts with checking whether the hinge or the screws gave way. This guide covers the repair step by step: how to tell whether the hinge can be fixed or needs replacing, and which replacement hinge fits the gate. The hinges below cover the repair, from a self-closing hinge for a metal gate to a chain link kit for an old gate.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

D&D TruClose Gate Hinge

D&D TruClose Gate Hinge

D&D TECHNOLOGIES9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A self-closing safety gate hinge with alignment legs and tension adjustment for square metal gates up to 66 lb.

Pros

  • Self-closes metal gates up to 66 lb
  • Tension adjustment for closing speed
  • Alignment legs for square posts
  • Polymer will not rust, bind, sag or stain

Cons

  • No warranty term is stated
  • For square posts only
  • Fits an 8/10 inch frame-to-post gap only
  • 66 lb limit suits light metal gates only
Insaga 6mm Gate Hinges

Insaga 6mm Gate Hinges

Insaga9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 6mm high-strength steel gate hinges with a 5/8 inch pin, rated to 600 lb per pair.

Pros

  • 600 lb load capacity per pair
  • 6mm high-strength steel with E-coating finish
  • 5/8 inch hinge pin
  • Fits wood or metal gates, fences and sheds

Cons

  • No warranty term is stated
  • Pre-drilled holes are required
  • Wood screws and expansion bolts are not included
  • No self-closing function is stated
SparkSway Chain Link Hinges
SparkSway9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack chain link gate hinge kit in hot-dip galvanized steel with bolts and nuts, for repairing an old gate or installing a new one.

Pros

  • Hot-dip galvanized steel resists rust
  • Fits 1-3/8 inch frames and 2-3/8 inch posts
  • Bolts and nuts included
  • Made for repairing an old gate or installing a new one

Cons

  • No warranty term is stated
  • Chain link gates only
  • One kit covers one gate
  • Silver finish only
WENHUALI Wall Mount Hinges

WENHUALI Wall Mount Hinges

WENHUALI9.4/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of wall mount gate hinges in carbon steel with a 5/8 inch pin and screws, for fences, barns and sheds.

Pros

  • 5/8 inch pin fits most gate frames
  • Powder-coated finish resists rust
  • Screws included
  • Fits fences, barns, sheds and gates

Cons

  • No warranty term is stated
  • No load capacity is stated
  • No self-closing function is stated
  • No tension adjustment is stated

As an Amazon Associate I earn from qualifying purchases.


Gate hinge repair: the short answer

Start by finding what failed. If the screws pulled out of soft wood, a hinge with fresh holes and new screws can fix it. If the hinge leaf is bent, cracked or rusted through, replace the hinge. Match the new hinge to the gate: the D&D hinge self-closes metal gates up to 66 lb, the Insaga hinges (on Amazon) carry 600 lb per pair, the SparkSway kit (on Amazon) fits chain link frames and posts, and the WENHUALI hinges mount (on Amazon) to a wall with a 5/8 inch pin. Measure the frame and the post before you buy, as the SparkSway listing states.

The gear for the job

The hinges below cover the fix, the replacement and the fit.

Fix it or replace it

A hinge that only needs screws can be fixed. The Insaga hinges need pre-drilled holes, and the listing says to choose wood screws for wood and expansion bolts for concrete. The WENHUALI hinges mount with screws, and no special tools are needed. A hinge that is bent, cracked or rusted through needs replacing: the SparkSway kit is made for repairing an old gate, and the D&D hinge replaces old hinges on square metal gates. Remove old hinges before installing new fence gate hardware, as the D&D listing states.

Match the replacement to the gate

Fit decides the replacement. The D&D hinge fits square post metal gates up to 66 lb with an 8/10 inch gate frame to fence post gap. The SparkSway kit fits 1-3/8 inch chain link gate frames and 2-3/8 inch chain link gate posts, so measure the outer diameter of the post and frame before purchase. The Insaga hinges fit wooden or metal gates, fences and shed gates, with 1/2 inch mounting holes. The WENHUALI hinges fit most gate frames with a 5/8 inch pin, and screws are included. See the gate hinge types guide if you are unsure which hinge type the gate uses.

Self-closing and tension

Some gates need to close on their own. The D&D hinge is a self-closing safety gate hinge with alignment legs and a tension adjustment system for closing speed. The polymer will not rust, bind, sag or stain and is self-lubricating. The other hinges here do not state a self-closing function, so a gate that must close itself needs the D&D hinge. The listing states the hinge is trusted for child water safety around pools, daycares and pet barriers.

Read the listing twice

The Insaga listing gives the size as 4.9 inches by 1.5 inches with a 5/8 inch hinge pin and 1/2 inch mounting holes, so check the pin and the holes against the gate frame. The D&D listing gives an 8/10 inch gate frame to fence post gap, so measure the gap before you buy. The SparkSway listing gives the frame hinge as 1-3/8 inch and the post hinge as 2-3/8 inch, so the two sizes must match the frame and the post. The WENHUALI listing gives a 5.0 x 1.5 inch size with a 5/8 inch pin, and screws are included.

FAQs from goat keepers

How do I fix a sagging gate hinge?

Find what failed. If the screws pulled out, fit a hinge with fresh holes and new screws. If the hinge leaf is bent or rusted through, replace the hinge with one that matches the gate weight and fit.

Can I repair a gate hinge or must I replace it?

A hinge that only needs screws can be fixed. A hinge that is bent, cracked or rusted through needs replacing. The SparkSway kit is made for repairing an old gate, and the D&D hinge replaces old hinges on square metal gates.

What size hinge do I need for a chain link gate?

The SparkSway kit fits 1-3/8 inch chain link gate frames and 2-3/8 inch chain link gate posts. Measure the outer diameter of the post and frame before purchase.

How do I stop a gate from slamming?

Use a self-closing hinge with tension adjustment. The D&D hinge self-closes metal gates up to 66 lb and its tension adjustment system sets the closing speed.

What screws do I need for a gate hinge?

It depends on the surface. The Insaga listing says to choose wood screws for wood and expansion bolts for concrete. The WENHUALI hinges include screws, and the SparkSway kit includes bolts and nuts.

D&D TruClose Gate Hinge
Still deciding? Our top pickD&D TruClose Gate Hinge
Check price on Amazon

More from the barn

See every goat fencing guide and all fencing and shelter guides.

More picks: best post hole diggers for rocky soil, best fence chargers for the money, best fence chargers for large pastures and best goat shelters.