Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Gate Lock Repair: Fixing and Replacing Latches

Gate lock repair: adjust a sagging gate, replace a worn latch or add a lock, with 4 latches compared by locking, fit and material.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Gate Lock Repair: Fixing and Replacing Latches
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1D&D LL3ABL LokkLatchD&D LL3ABL LokkLatch9.7/10View on Amazon
  2. 2SANKINS Self-Locking LatchSANKINS Self-Locking Latch9.7/10View on Amazon
  3. 3D&D LL3AL LokkLatchD&D LL3AL LokkLatch9.6/10View on Amazon
  4. 4WellMade Gate LatchWellMade Gate Latch9.5/10View on Amazon

A goat that has learned to lift a latch will be out of the pen before the morning milking is done, and gate lock repair starts with finding why the latch no longer holds. The fix is usually an adjustment, a replacement latch or an added lock. The latches in this guide cover those moves: key lockable latches, a self-locking steel latch and a padlockable steel latch.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

D&D LL3ABL LokkLatch

D&D LL3ABL LokkLatch

D&D TECHNOLOGIES9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A key lockable gate latch with an external access button that locks separately on each side of the gate, for square frame posts 1 to 6 in deep.

Pros

  • Locks separately on each side of the gate
  • External access button for 2-sided operation
  • Fits fence posts 1 to 6 in deep, with a gap variance of 3/8 to 1-1/4 in
  • Polymer will not rust, bind, sag or stain and is self-lubricating

Cons

  • No warranty term is stated
  • Industrial strength polymer, not metal
  • Main latch and external button lock separately
  • Stated for square frame posts only
SANKINS Self-Locking Latch

SANKINS Self-Locking Latch

SANKINS9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A self-locking gravity latch in thick alloy steel with mounting hardware and fasteners included; locks automatically when released, padlockable.

Pros

  • Gravity self-locking for inward and outward gates
  • Fasteners and mounting hardware included
  • Padlockable for added security
  • 30 years of latch production claimed by the brand

Cons

  • No warranty term is stated
  • Padlock not included
  • Bulky at 8.5 x 6.57 x 2.64 in
  • Alloy steel, not stainless
D&D LL3AL LokkLatch

D&D LL3AL LokkLatch

D&D TECHNOLOGIES9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A key lockable gate latch that opens and locks from only one side of the gate, for square frame posts 1 to 6 in deep.

Pros

  • Key lockable from one side of the gate
  • Fits fence posts 1 to 6 in deep, with a gap variance of 3/8 to 1-1/4 in
  • Vertical adjustment up to 3/8 in and horizontal adjustment up to 1-1/2 in
  • Polymer will not rust, bind, sag or stain and is self-lubricating

Cons

  • No warranty term is stated
  • Opens and locks from only one side of the gate
  • Industrial strength polymer, not metal
  • Stated for square frame posts only
WellMade Gate Latch

WellMade Gate Latch

WellMade9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A heavy duty self-locking steel gate latch with a spring-loaded fingertip release for inward and outward swinging gates.

Pros

  • Thick steel with a black rust resistant finish
  • Self-locking fingertip release with automatic closing
  • Mounts right or left for inward and outward swinging gates
  • Screw mounting hardware is included

Cons

  • No warranty term is stated
  • No dimensions are stated; the spec table is empty
  • Weighs 1 lb, heavier than the polymer latches here
  • No padlock fitting is stated

As an Amazon Associate I earn from qualifying purchases.


Gate lock repair: the short answer

Start by watching the gate close: if the latch misses the catch, the gate has sagged and the latch needs adjusting, not replacing. The D&D latches here adjust for sag, with vertical and horizontal adjustment on the LL3ABL and vertical adjustment up to 3/8 in and horizontal adjustment up to 1-1/2 in on the LL3AL. If the latch itself is worn, replace it with the WellMade self-locking (on Amazon) steel latch or the SANKINS padlockable steel latch (on Amazon). If the goats have learned the latch, add a lock: the LL3ABL locks on each side, the LL3AL locks on one side, and the SANKINS takes a padlock.

Measure before ordering a replacement. The D&D latches fit fence posts 1 to 6 in deep with a gate post to fence post gap variance of 3/8 to 1-1/4 in, and both measure 4.0 by 2.0 by 4.0 in. The WellMade listing gives no dimensions, and the SANKINS listing gives only a title, so check the old latch against the stated figures before buying. Post size also matters: standard fence post size lists common dimensions.

Why a gate lock stops holding

A latch stops holding for a few plain reasons. The gate sags and the latch no longer lines up with the catch, the ground moves and the posts shift, or the latch itself wears and no longer springs shut. The D&D listings name gate sag and ground movement outright, and their vertical and horizontal adjustments exist to take up that movement. Rust and binding are the other common causes, and the D&D polymer is stated not to rust, bind, sag or stain, while the WellMade latch carries a black rust resistant finish.

The latches compared

Locking is the first difference: the LL3ABL locks on each side, the LL3AL locks on one side only, the WellMade latch locks itself when the gate closes, and the SANKINS takes a padlock. Material is the other difference: polymer on the D&D latches, steel on the WellMade and SANKINS latches.

Latch Locking Adjustment Material Amazon
D&D LL3ABL LokkLatch Each side separately Vertical and horizontal Industrial strength polymer View on Amazon
D&D LL3AL LokkLatch One side only Vertical up to 3/8 in, horizontal up to 1-1/2 in Industrial strength polymer View on Amazon
WellMade Gate Latch Self-locking Not stated Thick steel View on Amazon
SANKINS Gate Latch Padlockable, self-locking Not stated Steel

Figures as stated in each listing.

Adjusting a sagging gate

If the latch misses the catch, adjust it before replacing it. The LL3ABL adjusts vertically and horizontally, and the LL3AL adjusts vertically up to 3/8 in and horizontally up to 1-1/2 in. Loosen the fitting, move the latch until it meets the catch, and tighten it again. If the gate itself sags, bracing helps: how to brace a fence post covers the fix.

Replacing a worn latch

When adjustment no longer helps, take the old latch off and fit a new one. The WellMade latch mounts right or left with the included screws, for inward and outward swinging gates. The SANKINS latch is a steel padlockable replacement. Match the new latch to the post: the D&D latches fit square frame posts 1 to 6 in deep, and the WellMade latch suits wood or metal gates. Match the latch to the post type: types of fence post lists the materials and uses.

Gear for gate lock repair

The latches below handle the repair step: each one states how it locks and what post it fits, so match the latch to the gate before you start.

FAQs from goat keepers

How do you fix a gate latch that will not catch?

Check the alignment first: a sagging gate misses the catch, and the D&D latches adjust to take up the sag. If the latch lines up and still will not hold, replace it with a self-locking latch such as the WellMade, which closes automatically.

Can a goat gate lock from both sides?

Yes, with a latch made for it. The D&D LL3ABL locks separately on each side of the gate, with an external access button for 2-sided operation. The LL3AL locks from one side only, so it does not suit a gate that needs locking from both sides.

What size post does a LokkLatch fit?

The D&D latches fit fence posts 1 to 6 in deep, with a gate post to fence post gap variance of 3/8 to 1-1/4 in. Both are made for square frame posts on metal, wood and vinyl fence gates.

Does a gate latch need a padlock?

Not always. The SANKINS latch is padlockable, and the D&D latches lock with a key, so a padlock is only needed if the latch itself takes one. The WellMade latch is self-locking with no padlock fitting stated.

D&D LL3ABL LokkLatch
Still deciding? Our top pickD&D LL3ABL LokkLatch
Check price on Amazon

More from the barn

See every post driver and puller guide and all fencing and shelter guides. See types of fence post. See how to brace a fence post.

More picks: setting a fence post in concrete, standard fence post size, fixing a loose fence post and putting in a fence post.