
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
mozoba Hanging Chicken Feeder Trough9.6/10View on Amazon - 2
REDMOND Goat Mineral Supplement Mix9.5/10View on Amazon - 3
REDMOND Goat Mineral Supplement9.5/10View on Amazon
Morning chores start with hay on the ground again. Goats pull flakes out of a rack, drop much of it in the bedding and then stand on the good hay while they wait for more. These goat feeder ideas cover feeder styles that keep hay and grain where goats can reach them, from wall racks and freestanding feeders to hay bags, troughs and grain pans. Each idea fits a different pen, herd and chore routine, so start with where the feeder will live and how often it will be filled.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Goat feeder ideas: the short answer
Start with placement, then pick the style, then check material and build. A wall rack suits a barn or shed with a solid wall or post. A freestanding feeder suits a pasture or open pen with no wall at all. A fabric hay bag suits a trailer, a show pen or a goat that needs its own ration away from the herd. A trough or pan suits grain and loose feed that a rack cannot hold. Once the style is settled, compare how the feeder mounts, how it fills, how it cleans and what it is made of, then read the listing with care for conflicting figures. If you would rather go straight to scored picks, our best hay feeder for goats roundup compares feeders on these points.
Feeder styles compared
| Style | Where it fits | Material | Daily chore |
|---|---|---|---|
| Wall rack | Barn wall, shed wall or fence post | Steel or galvanized steel | Fill from above, sweep below |
| Freestanding feeder | Pasture or open pen | Galvanized steel | Fill from above, move as needed |
| Hay bag | Trailer, show pen or stall | Fabric with mesh sides | Hang, fill and take down |
| Trough or pan | Pen floor or low stand | Steel, plastic or rubber | Fill, dump and rinse |
| Grain feeder | Pen corner or milking area | Steel or plastic | Measure, pour and wash |
Wall racks
Wall racks are the most common goat hay feeder. They keep hay off the floor and leave the pen clear for cleaning. A rack hangs on a wall, a post or a fence board, and goats pull hay through bars or slats. Wall racks need a solid surface to anchor into, so check what the barn offers before buying. A rack mounted by the barn door is easier to refill than a rack in the back corner, and a wide top opening makes it easier to drop a flake in from above.
Freestanding feeders
A freestanding feeder sits on the ground with no wall. It suits a pasture, a run-in shed with no solid wall or a pen where goats eat from every side. Freestanding feeders need level ground and enough room for goats to reach the rack without crowding. They are heavier to move than a wall rack, so place them where they can stay through the season. A feeder with a pan below the rack catches some of the hay goats pull out and holds grain in a separate compartment.
Hay bags
Fabric hay bags hang from a fence, gate or trailer tie. Bags are light and portable, which makes them handy for shows and travel. Fabric is easier for a determined goat to chew than steel, so a bag is better for short-term use than for a permanent barn feeder. Hang a bag where goats can reach the opening without standing on it, and take it down when it is empty so it stays dry.
Troughs and grain pans
Troughs and pans hold grain, loose feed and chopped forage that a rack cannot hold. A low pan suits grain fed at milking time, while a longer trough lets goats eat side by side without crowding. Pans are easy to dump and rinse, which matters when grain gets wet or stale. Keep a separate mineral feeder nearby rather than mixing minerals into the grain pan, and see our goat mineral feeder ideas for options.
Hay feeders: keeping hay off the ground
Hay waste is the chore that drives most feeder choices. Goats pull hay out, sort through it and drop the stems they do not want, so a feeder that slows the pull saves hay and saves sweeping. Bars and slats that are close together make goats work for each mouthful, while a wide open rack lets them drag out a whole flake at a time. A rack with a tray or pan below catches some of the dropped hay and keeps it off the bedding.
Capacity on listings is given in gallons of space, not in weight of hay, and makers measure it differently. Treat gallons as a way to rank feeders against each other, not as a daily ration. For more on bale sizes and what they mean for a feeder, see our guide to hay bale dimensions. Large round bales need their own setup, and our round bale feeder ideas cover racks, rings and nets for bale feeding.
Grain feeders and feed pans
Grain feeding is a separate chore from hay feeding, and it needs a separate feeder. A grain pan or trough holds the ration where goats can reach it and where it stays dry. Feed grain at a regular time and place so goats learn the routine and gather without crowding. A pan with a low edge suits goats that eat with their heads down, while a deeper trough keeps grain from spilling when goats nudge it.
Shape matters for pans as much as size. Our comparison of round and rectangular feed troughs looks at how shape changes floor space and how goats share the trough. A puzzle feeder can slow a goat that eats grain in a rush; see what a puzzle feeder is for styles, filling and placement. Keep grain feeders away from water buckets so spilled grain stays dry, and wash pans when grain gets wet.
Placement and mounting
Mounting decides how stable the feeder is and how easy it is to fill. Wall racks need anchors into something solid, so check the wall, post or fence board before ordering. Freestanding feeders need level ground and enough room for goats to reach from every side. Place hay feeders away from water buckets so dropped hay stays dry, and keep a separate goat mineral feeder nearby rather than mixing minerals into the hay rack. For water placement in the same pen, our water trough ideas cover tanks and troughs for goats.
Think about filling too. A rack by the barn door is easier to refill than a rack in the back corner. A wide top opening makes it easier to drop a flake in from above. Hang feeders at a height goats can reach without climbing, and leave a clear path for the wheelbarrow and the morning bucket run.
Materials: steel, galvanized steel or fabric
Material sets how long a feeder lasts outdoors. Steel racks hold up to chewing and climbing better than fabric. Galvanized and powder-coated finishes are the better choice for feeders that live outdoors or in a damp barn. Fabric bags trade durability for weight and portability.
- Steel: sturdy and chew resistant, needs a coated finish outdoors.
- Galvanized steel: coated against rust, a common choice for pasture feeders.
- Powder-coated steel: a painted finish over steel, easy to wipe clean.
- Fabric with mesh: light and portable, best for short-term use.
For troughs, material changes cleaning as well as weight. Our comparison of galvanized and stainless feed troughs looks at rust, cleaning and outdoor use.
Filling, cleaning and daily chores
A feeder is a daily tool, so judge it by the chores it creates. Filling should take a moment: open the top, drop in a flake or pour in grain, close it and move on. Cleaning should be simple too: sweep under the rack, dump the pan and rinse when grain gets wet. A feeder that traps old hay in corners will need a brush and a regular emptying, so look for smooth surfaces and a bottom that drains or dumps clean.
Watch the pen as the herd eats. A boss goat will claim the best spot at the rack and push others aside, so an extra rack in a separate pen often works better than a shared rack for a mixed herd. Empty the feeder when hay gets wet or stale, and move a freestanding feeder to fresh ground when the pen floor gets muddy. Small daily habits keep the feeder useful: sweep, dump, rinse and refill.
What this guide does not cover
This guide covers feeder hardware only. It does not cover how much hay a goat needs, hay types or any health question. Ask a veterinarian or local extension office about rations and goat health.
FAQs from goat keepers
What is the best type of hay feeder for goats?
It depends on the setup. A wall rack suits a barn with a solid wall, a freestanding feeder suits a pasture, and a fabric hay bag suits travel and shows. Match the style to where the feeder will live.
How do I stop goats wasting hay?
Use a feeder with bars or slats that slow the pull, add a tray or pan below the rack to catch dropped hay, and fill with flakes rather than loose hay. Sweep up dropped hay before it mixes with bedding.
Are hay bags good for goats?
Hay bags work for short-term use. Fabric is light and portable, which suits shows and travel, and it is easier to chew than steel, so a steel rack is the sturdier choice for a permanent barn feeder.
Do goat feeders come with mounting hardware?
Some do. Wall racks may include screws, hooks or brackets, while freestanding feeders need no wall mount. Check the listing for what is included before ordering, and measure the wall or pen so the feeder fits the space.
More from the barn
See every hay feeder guide and all feeding and water guides.
More picks: best hay feeders for goats, goat mineral feeders, heated water buckets and goat shelters.
