
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
EFencSolv Step-In Electric Fence Posts9.7/10View on Amazon - 2
D&D TruClose Multi-Adjust Round Post Gate Hinge9.7/10View on Amazon - 3
MIWEVRO Metal Garden Fence Posts9.7/10View on Amazon - 4
50 PCS Electric Fence PostsView on Amazon - 5
30PCS 41" Electric Fence Step-in Pigtail PostsView on Amazon - 6
50PCS 48" Plastic Step-in Electric Fence Posts with ClipsView on Amazon - 7
41" Systems Pig Tail Step-in Electric Fence Post for LivestockView on Amazon - 8
30Pcs 41" Systems Pig Tail Step-in Electric Fence Post forView on Amazon
Moving a temporary fence line often teaches you fast which post earns its keep: for pigtail posts vs step in posts, the difference is how the wire attaches. A pigtail loop curls around the wire and holds it in a loop, while a step-in post with clips grips the wire in molded or adjustable clips. Pick the loop for hard ground and multi-strand lines, and pick clips for fast height changes on soft ground.
Also worth comparing
50 PCS Electric Fence PostsCheck price on Amazon
30PCS 41" Electric Fence Step-in Pigtail PostsCheck price on Amazon
50PCS 48" Plastic Step-in Electric Fence Posts with ClipsCheck price on Amazon
41" Systems Pig Tail Step-in Electric Fence Post for LivestockCheck price on Amazon
30Pcs 41" Systems Pig Tail Step-in Electric Fence Post forCheck price on Amazon
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Pigtail posts vs step in posts: the short answer
Start with the wire holder, then check height and ground. A pigtail post carries an insulated loop that the wire threads through, and the two pigtail posts here stand on crimped or welded feet. A step-in post carries clips along the shaft, and the two step-in posts here offer 7 clips on a fiberglass shaft or 8 molded clips on a plastic shaft. Both types step into the ground with a foot, so no digging is needed either way. Once the holder is settled, compare the stated height above ground, the wire types each listing names and whether the foot suits hard ground.
Four posts compared
| Post | Type | Height | Wire hold | Foot |
|---|---|---|---|---|
| Toriexon 50 PCS Step-in Fiberglass | Step-in | 57 inch total | 7 wire clips | Ground spikes, step-in |
| FENSMILE 30 PCS Pigtail | Pigtail | 41 inch total, 35 inch above ground | Insulated pigtail | 2 crimped feet |
| MTB 10 Pack Pigtail | Pigtail | 39 inch total, 32 inch above ground | Insulated pigtail | 7 inch welded, 2-pronged foot |
| FENSMILE 50 PCS Step-in Plastic | Step-in | 48 inch total, 38.2 inch out of ground | 8 molded clips | Reinforced steel spike, anti-rotation spike |
Pigtail posts
Pigtail posts hold wire in a curled loop at the top of the post. The FENSMILE pigtail post lists a total length of 41 inches with 35 inches above ground, a diameter of 6.3mm and a pack of 30, and it describes galvanised spring steel as ideal for hard ground, with 2 rugged crimped feet and an insulated pigtail. The MTB pigtail post lists 39 inches long with 32 inches above ground, a 7 inch welded, 2-pronged foot base and an insulated pigtail, in a pack of 10. The MTB listing says the post holds 3 strands of wire, polywire or rope to 35 inches above ground, and it names 3 wire, 6 wire or 9 wire polywire. A loop suits a line that stays up for a while, since the wire sits inside the curl rather than in a clip that can pop open.
Step-in posts with clips
Step-in posts hold wire in clips spaced along the shaft, so heights change by moving the wire between clips. The Toriexon step-in post lists 57 inches with 7 wire clips, a glass fiber shaft and a step-in foot, and it says the post steps into the ground with a foot and no tools required. It names electric fence wires, polywire, tape and rope as compatible. The FENSMILE step-in plastic post lists 48 inches total with 38.2 inches out of ground, 8 molded clips and a reinforced steel spike, and it gives clip heights from the step-in flange at 5.00, 9.50, 12.50, 17.45, 21.45, 26.75, 30.10 and 35.25 inches, with 35.25 inches as the highest fence height. Its clips hold electric fence wire up to 1/4 inch and poly tape up to 2 inches. Clips suit a line that moves often, since heights change without rethreading a loop.
Heights and wire counts
Heights here run from 39 inches to 57 inches in total length. Above ground, the FENSMILE pigtail post lists 35 inches, the MTB pigtail post lists 32 inches above ground beside a 35 inch strand height, and the FENSMILE step-in plastic post lists 38.2 inches out of ground. The Toriexon step-in post lists a 57 inch total length with no above-ground figure stated, so a reader planning a fence height should check the listing for that figure. Wire counts differ too: the MTB pigtail post holds 3 strands, the Toriexon step-in post offers 7 wire clips and the FENSMILE step-in plastic post offers 8 molded clips. More clips mean more height choices, not a taller fence on their own.
Ground hold: feet, spikes and flanges
The foot decides whether the post stays put. The FENSMILE pigtail post uses 2 rugged crimped feet and names hard ground as its ideal ground, while the MTB pigtail post uses a 7 inch welded, 2-pronged foot base. The Toriexon step-in post uses ground spikes with a step-in foot and no tools, and the FENSMILE step-in plastic post uses a heavy-duty galvanised sharp metal spike end with a step-in flange and an anti-rotation spike that keeps the post from turning. The FENSMILE plastic post also names hard ground for its spike. A spike or pronged foot suits firm soil, while a flange gives the boot a flat place to press on soft ground.
Read the listing twice
These listings contradict themselves in places, and the numbers that conflict are usually the ones you need to plan the install:
- FENSMILE pigtail: 30PCS in the title against a spec table quantity of 10pcs, and a spec table length of 91cm/36in against a title and bullets length of 41 inches. The spec table also names the manufacturer as FENCE SHOCK while the title brand is FENSMILE.
- Toriexon step-in: metal ground spikes in the title against a glass fiber shaft in the bullets, and package dimensions of 58 x 9 x 7 inches beside a 57 inch post.
- MTB pigtail: 32 inches above ground in the bullets against a strand height of 35 inches above ground in the same bullets.
- FENSMILE step-in plastic: clip heights from the step-in flange up to 35.25 inches beside a total length of 48 inches with 38.2 inches out of ground, so the top clip sits below the top of the post.
Measure your line before ordering and allow for the larger figure where a listing gives two. Where a listing gives two pack counts, check the title count at checkout.
FAQs from goat keepers
Which post is better for hard ground?
Both pigtail listings and one step-in listing name hard ground. The FENSMILE pigtail post describes galvanised spring steel as ideal for hard ground, and the FENSMILE step-in plastic post describes a sharp metal spike end for stepping into hard ground.
How many strands can a pigtail post hold?
The MTB pigtail post holds 3 strands of wire, polywire or rope, and it names 3 wire, 6 wire or 9 wire polywire. The FENSMILE pigtail listing does not state a strand count, so check its loop size against your wire before ordering.
Do step-in posts need tools?
No tools are stated for either step-in post here. The Toriexon post steps into the ground with a foot and no tools required, and the FENSMILE plastic post uses a step-in flange to set the post with a foot.
What heights do these posts reach above ground?
The FENSMILE pigtail post lists 35 inches above ground, the MTB pigtail post lists 32 inches above ground, and the FENSMILE step-in plastic post lists 38.2 inches out of ground. The Toriexon step-in post lists a 57 inch total length with no above-ground figure stated.
More from the barn
See every goat fencing guide and all fencing and shelter guides.
More picks: browse fence chargers, post drivers and fencing and shelter.
