Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Post Hole Digger Manual: How to Choose One

Post hole digger manual guide: hand augers and clamshell diggers sized by stated diameter, handle length and weight, with the listing gaps to check.

Post Hole Digger Manual: How to Choose One
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR T Post DriverVEVOR T Post DriverView on Amazon
  2. 2Johnson 175-O Post LevelJohnson 175-O Post LevelView on Amazon
  3. 3Manual T-Post PullerManual T-Post PullerView on Amazon
  4. 4Fence Post DriverFence Post DriverView on Amazon

The fence line sags where the goats lean on it each morning, and the next post has to go in before the wire gives way for good. A post hole digger manual tool opens that hole with hand power alone, no fuel and no cord, and this guide explains how to choose one. It covers the hand auger and the clamshell digger, the sizes the listings state, the handles they ship with and the numbers that do not match between a title and a spec table.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Post hole digger manual: the short answer

Start with the hole, then pick the style. A hand auger suits soft soil, sand and lawn, where a spiral blade can bite and lift the dirt out in turns. A clamshell digger suits fence posts, mailbox posts and holes where the ground is firmer and the blades can close around the soil. Once the style is settled, compare the stated diameter, the handle length and the weight, and read the listing twice for conflicting numbers.

If the choice is between a digger and an auger, the post hole digger vs auger comparison explains the difference in plain terms.

Two manual styles compared

Style Example listing Stated size Handle
Hand auger Oscorna 4 x 44.5 inch 4 inch diameter Non-slip handle
Hand auger Leriton 6 x 46 inch 6 inch point spread Hardwood T-handle
Hand auger Seymour IWAN 6 inch 6 inch diameter Welded steel T-handle
Clamshell digger Truper 30379 48 inch handles White ash wood handles
Clamshell digger Seymour Perfection 7.25 inch spread 48 inch hardwood handles
Post hole digger YEELOR Integrated steel blade 55 inch stainless steel handle

Hand augers

A hand auger is a spiral blade on a shaft with a T-handle. The Oscorna lists a 4 inch diameter and a 44.5 inch total length, with a 4-stage detachable connection and 2 different heads, an auger head and a twist tiller head. The Leriton lists a 6 inch point spread and a length of about 46 inches, with a hardened steel blade and a non-slip hardwood T-handle. The Seymour IWAN lists a 6 inch diameter and a 6 inch point spread, with a steel blade riveted to an iron yoke and a welded steel T-handle. Augers suit soft soil, sand and lawn, and the Oscorna listing says its tool works for fence posts, bulbs, flowers, seedlings, mailbox posts and beach umbrellas.

Clamshell diggers

A clamshell digger has handles and blades that close around the soil. The Truper lists 48 inch white ash handles and a weight of 4.785 pounds, and the maker calls it a professional grade tool for commercial and industrial use. The Seymour Perfection lists a 13 gauge sharpened blade, a 7.25 inch spread and 48 inch hardwood handles, with a double bolt connection and a weight of 8.3489 pounds. The YEELOR lists a one-piece steel blade, an adjustable handle and a 55 inch stainless steel handle, with the handle and blade joined by eight bolts and a weight of 7.9 pounds. Clamshell diggers suit fence posts, mailboxes and fencing, and the YEELOR listing says its blade copes with various soil and environmental conditions.

Reading the size numbers

Diameter and point spread set how wide the hole opens. The Oscorna lists a 4 inch diameter, the Leriton lists a 6 inch point spread, the Seymour IWAN lists a 6 inch diameter and a 6 inch point spread, and the Seymour Perfection lists a 7.25 inch spread. Length sets how far down the tool reaches and how much leverage the handle gives. The Oscorna lists a 44.5 inch total length, the Leriton lists a length of about 46 inches, the Truper lists 48 inch handles, the Seymour Perfection lists 48 inch handles and the YEELOR lists a 55 inch handle. Weight sets how heavy the tool feels on a long fence line. The Truper lists 4.785 pounds, the Seymour IWAN lists 7.4 pounds, the YEELOR lists 7.9 pounds, the Leriton lists 7.94 pounds and the Seymour Perfection lists 8.3489 pounds. Compare these stated figures against each other and against the post you plan to set, and remember that a listing can state different lengths for the same tool.

Handles: length, grip and connections

Handles decide comfort and control. The Leriton lists a non-slip hardwood T-handle on a steel shaft, and the Seymour IWAN lists a welded steel T-handle. The Truper lists white ash handles, which the maker says give an optimum ratio of resistance and flexibility, and the Seymour Perfection lists precision turned hardwood handles. The YEELOR lists an adjustable handle, so the length can change to suit the person using it, and the handle and blade are joined by eight bolts with a precision turning thread connection. The Oscorna lists a non-slip handle made of a material the maker calls environmentally friendly, and a 4-stage detachable connection that breaks down for storage. Check the handle material and the connection before ordering, because a loose joint is the failure that makes a digger hard to use.

Materials: steel blades and hardwood handles

Blade steel sets how the edge holds up in the ground. The Leriton lists a hardened steel blade, the Seymour IWAN lists a steel blade riveted to a tough pliable iron yoke, the YEELOR lists a one-piece steel blade with an integrated design, and the Seymour Perfection lists a 13 gauge sharpened blade. Handle materials split between wood and steel. The Truper and the Seymour Perfection list hardwood handles, white ash on the Truper, while the Leriton lists a hardwood T-handle and the Seymour IWAN lists a steel shaft with a welded steel T-handle. The YEELOR lists a stainless steel handle. Steel handles resist bending, wood handles absorb shock and feel warmer in cold weather, and the listing, not the look of the tool, is what states the material.

Read the listing twice

Manual post hole digger listings often contradict themselves, and the numbers that conflict are usually the ones you need to plan the job:

  • Truper: 48 inch handles in the title against 54.7 inches in the spec table product dimensions.
  • Seymour Perfection: 48 inch handles in the bullets against 73.0 inches in the spec table product dimensions.
  • Leriton: a length of about 46 inches in the bullets against 46.46 inches in the spec table product dimensions.
  • YEELOR: a 55 inch handle in the title against 55.1 inches in the spec table product dimensions.
  • Seymour IWAN: a 6 inch diameter auger with spec table dimensions of 11.0 x 11.0 x 5.0 inches, which read like a packed size rather than the tool itself.

Measure the post and the ground before ordering and allow for the larger figure. When a title and a spec table disagree, trust the title and the bullets, and check the listing again before the tool arrives.

What this guide does not cover

This guide covers hand-powered tools only. It does not cover gas or battery augers, and it does not cover how deep a fence post should sit or how to set a post in concrete. For powered options, see the best gas powered auger for post holes roundup and the battery vs gas post hole digger comparison. Ask your local extension office about fence layout and post setting for your ground.

FAQs from goat keepers

What is a post hole digger manual tool?

It is a hand-powered tool for opening holes for fence posts, mailbox posts and planting, with no fuel or electricity required. The common forms are the hand auger, a spiral blade on a shaft, and the clamshell digger, with handles and blades that close around the soil.

How wide a hole does a manual post hole digger make?

The listings compared state a 4 inch diameter on the Oscorna, a 6 inch point spread on the Leriton, a 6 inch diameter on the Seymour IWAN and a 7.25 inch spread on the Seymour Perfection. Match the stated spread to the post you plan to set.

How long are manual post hole digger handles?

Stated lengths run from a 44.5 inch total length on the Oscorna to a 55 inch handle on the YEELOR, with 46 inches on the Leriton and 48 inch handles on the Truper and the Seymour Perfection. Longer handles give more leverage, and the YEELOR handle (on Amazon) adjusts to suit the person using it.

How heavy is a manual post hole digger?

The listings state 4.785 pounds on the Truper, 7.4 pounds on the Seymour IWAN, 7.9 pounds on the YEELOR, 7.94 pounds on the Leriton and 8.3489 pounds on the Seymour Perfection. The Oscorna listing states no weight.

Do manual post hole diggers need fuel or power?

No. The Oscorna listing states its manual design needs no fuel or electricity, and none of the listings compared states a motor, a battery or a power cord. Hand power alone turns the auger and closes the blades.

What soil suits a manual post hole digger?

The Oscorna listing says its auger works in soft soil, sand and lawn, and the YEELOR listing says its blade copes with various soil and environmental conditions. For ground with rock in it, see the best post hole digger for rocky soil roundup.

More from the barn

See every post driver and puller guide and all fencing and shelter guides.

More picks: best gas powered auger for post holes, best post hole digger for rocky soil, best post hole digger for compact tractor and post hole digger vs auger.