Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Staple Gun Staple Size for Fencing: Crown, Legs and Guns

Staple gun staple size is crown width and leg length, and the right size follows the wire, the post and the gun that drives it.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Staple Gun Staple Size for Fencing: Crown, Legs and Guns
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LIFENCE 100-Piece StaplesLIFENCE 100-Piece Staples9.7/10View on Amazon
  2. 2Arrow JT27P KitArrow JT27P Kit9.6/10View on Amazon
  3. 3LEIFIDE 2-Pack Stapler GunLEIFIDE 2-Pack Stapler Gun9.6/10View on Amazon
  4. 4CRAFTSMAN V20 CMCN410BCRAFTSMAN V20 CMCN410B9.4/10View on Amazon

A fence wire that pops loose from a post leaves the whole line slack, and staple gun staple size decides whether the staple holds the wire or splits the post. A staple gun drives U-shaped or crown staples into wood posts to pin wire in place, and the size must match the wire and the post. This guide explains staple sizes and which size suits fence wire.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

LIFENCE 100-Piece Staples

LIFENCE 100-Piece Staples

LIFENCE9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100-piece set of 304 stainless steel fence staples, 0.65 inches wide and 1 inch long, with an 8-claw serrated grip and drill-powered install.

Pros

  • 304 stainless steel for rust resistance outdoors
  • 8-claw serrated grip for softwood and hardwood posts
  • Drill-powered install with hex drivers included
  • Reusable: reverse the drill to remove and reposition

Cons

  • No warranty term is stated
  • The listing says 2 hex drivers in one bullet and 1 in the kit list
  • 5X stronger holding power and 35% faster install are maker claims with no method
  • Leg length is not stated apart from the 1 inch size
Arrow JT27P Kit

Arrow JT27P Kit

Arrow Fastener9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A light duty manual staple gun with a safety lock and 2000 3/8 inch staples, for 1/4, 5/16 and 3/8 inch JT21 staples.

Pros

  • Supports 1/4, 5/16 and 3/8 inch JT21 staples
  • Safety lock helps prevent accidental firing
  • 2000 3/8 inch staples included in two boxes
  • Bottom-loading magazine with a visible staple indicator

Cons

  • No warranty term is stated
  • Light duty build for upholstery and wood, no fencing use stated
  • PC+ABS body rather than steel
  • Staple sizes are limited to three JT21 sizes
LEIFIDE 2-Pack Stapler Gun

LEIFIDE 2-Pack Stapler Gun

LEIFIDE9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of galvanized steel fence stapler guns for 2 inch fence studs, struck with a hammer, 6.3 x 0.7 x 1.2 inches each.

Pros

  • 2-pack suits two-person work or two fence areas
  • Galvanized steel with a zinc layer against damp and wood sap
  • Hammer-struck pin keeps hands away from the nail
  • Depth can be fine-adjusted by tapping with a hammer

Cons

  • No warranty term is stated
  • Needs a hammer, not in the box
  • Made for 2 inch fence studs only
CRAFTSMAN V20 CMCN410B

CRAFTSMAN V20 CMCN410B

CRAFTSMAN9.4/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cordless 3/8 inch wide crown stapler on the V20 battery platform, with tool-free depth control, a wire guide and 4 preference settings, sold as tool only.

Pros

  • States up to 5,800 staples driven
  • Tool-free depth control for varying material thickness
  • Onboard wire guide and 4 preference settings
  • Lightweight at 2.9 lbs for the tool only

Cons

  • No warranty term is stated
  • Tool only, so the battery and charger are separate
  • The 5,800 staple claim carries a double asterisk with no footnote

As an Amazon Associate I earn from qualifying purchases.


Staple gun staple size: the short answer

Staple gun staple size is read as crown width and leg length: the crown is the flat top that spans the wire, and the legs are the prongs that sink into the post. Fence work uses wide crown and fence staples sized to the wire; light work uses narrow crown staples. Match the size on the box to the gun, the wire and the post.

For the gear, the best staple gun for fencing wire roundup scores 4 guns.

Staple sizes compared

Product Staple size What it fastens Power Amazon
CRAFTSMAN V20 CMCN410B 3/8 inch wide crown Varying thickness Cordless battery View on Amazon
LIFENCE fence staples 0.65 inch wide, 1 inch long Wire fencing Drill powered
LEIFIDE stapler gun 2 inch fence studs Fence nails Hammer struck
Arrow JT27P 1/4, 5/16 and 3/8 inch Upholstery, wood and crafts Manual

Wide crown staples

A wide crown staple has a flat top that spans the wire and two legs that sink into the post. The CRAFTSMAN V20 gun (on Amazon) drives 3/8 inch wide crown staples with tool-free depth control. Check the crown width against the gun, because a crown that does not fit the magazine will not feed.

Fence staples

Fence staples are U-shaped fasteners made to pin wire to wood posts. The LIFENCE staples (on Amazon) are 0.65 inches wide and 1 inch long, in 304 stainless steel, with an 8-claw serrated grip that the listing says digs into softwood and hardwood posts. They install with a drill and hex drivers, and the listing says reversing the drill removes them.

Light duty staples

Light duty staples suit upholstery, furniture and small wood repairs, not fence wire. The Arrow JT27P kit takes JT21 staples in 1/4, 5/16 and 3/8 inch, and the kit includes 2000 3/8 inch staples in two boxes. The gun is manual, weighs 9.9 oz, and has a safety lock and a handle lock.

Crown width and leg length

Every staple size has two measures: crown width, the width of the flat top, and leg length, the length of the prongs. The CRAFTSMAN gun takes a 3/8 inch crown, the Arrow kit takes 1/4, 5/16 and 3/8 inch crowns, and the LIFENCE staples are 0.65 inches wide and 1 inch long.

Matching the staple to the wire and the post

The wire sets the crown and the post sets the leg. A wide crown spans the wire; a narrow crown suits thin wire and light work. The LIFENCE listing names oak, ash and osage as hardwoods its 8-claw staples grip. A staple that is too long can split a thin post, so check the leg against the post first.

Powered, manual or hammer-struck

Staple guns come in 4 drive types. The CRAFTSMAN V20 is cordless, so it suits long fence lines with no cord to drag. The LIFENCE staples install with a drill and hex drivers. The LEIFIDE gun is struck with a hammer, which suits small jobs and repairs. The Arrow JT27P is manual, for light work at a bench.

The guns and staples that cover this work

The gear below covers: a cordless crown stapler for long lines, drill-powered fence staples for wire on wood posts, a hammer-struck stapler for 2 inch studs, and a light manual gun for small repairs.

What this guide does not cover

This guide covers staple sizes and the guns that drive them only. It does not cover driving depth, wire tension, or repairing a leaning post. For local rules about fence lines and boundaries, ask the fencing supplier or the local extension office. For questions about goat health or feed, ask a veterinarian.

FAQs from goat keepers

What staple size fits a fence staple gun?

Match the crown and leg to the gun, the wire and the post. The CRAFTSMAN gun takes a 3/8 inch wide crown, and the LIFENCE staples are 0.65 inches wide and 1 inch long for wire fencing.

What does 3/8 inch mean on a staple gun?

It is the crown width the gun takes, in inches. The CRAFTSMAN gun and the Arrow kit take a 3/8 inch crown, and the Arrow kit also takes 1/4 and 5/16 inch staples.

Can a light duty staple gun staple fence wire?

No. The Arrow JT27P is a light duty gun for upholstery, furniture and small wood repairs, and the listing states no fencing use. Fence wire needs a fence staple and a gun made for the work.

Do fence staples rust?

Plain steel staples can rust outdoors. The LIFENCE staples are 304 stainless steel, stated to resist corrosion, rust and weathering. The LEIFIDE gun is galvanized steel with a zinc layer stated to resist corrosion from damp environments and wood sap. Read the galvanized vs stainless fence staples guide before choosing.

How is a fence staple removed?

It depends on the staple. The LIFENCE staples are reusable: reverse the drill to remove and reposition them without bending or breaking, per the listing. For a hammer-driven staple, use a fence staple remover tool. Check the best fence staple remover tool roundup for pullers.

LIFENCE 100-Piece Staples
Still deciding? Our top pickLIFENCE 100-Piece Staples
Check price on Amazon

More from the barn

See every goat fencing guide and all fencing and shelter guides.

More picks: best staple gun for fencing wire, best heavy duty fence staples for wire fencing, fence staples vs fence clips and hand vs electric staple gun.