Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Fence Staple Remover Tool (2026): 4 Tools Compared

Four fence staple remover tools compared by build, size, weight and uses, for fence repairs on goat properties and at home.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Best Fence Staple Remover Tool (2026): 4 Tools Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Enderes Staple PullerBest OverallEnderes Staple Puller9.7/10View on Amazon
  2. 2Bostitch Staple RemoverBest WarrantyBostitch Staple Remover9.5/10View on Amazon
  3. 3Bates Choice Multi-PlierMulti-Tool PickBates Choice Multi-Plier9.6/10View on Amazon
  4. 4Crescent Fence ToolPliers PickCrescent Fence Tool9.7/10View on Amazon

When a fence wire sags and the old staple sits rusted in the post, the best fence staple remover tool pulls it clean without tearing the post apart. We compared fence and staple tools by build, size, weight, stated uses and warranty, using only what each listing publishes.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

  • Enderes Staple Puller
    Best Overall Enderes Staple Puller: 7-1/2 in drop forged puller for fence repairs Check price on Amazon
  • Bostitch Staple Remover
    Best Warranty Bostitch Staple Remover: 7-year limited warranty, pack of 3, all-metal Check price on Amazon
  • Bates Choice Fence Pliers
    Multi-Tool Pick Bates Choice Multi-Plier: Multi-plier fence tool with nail and staple puller Check price on Amazon
  • Crescent 10in Fence Tool
    Pliers Pick Crescent Fence Tool: 10-inch fence tool pliers with wire cutter and staple puller Check price on Amazon

The gear we picked

Enderes Staple Puller

Enderes Staple Puller

Enderes9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Drop forged, one-piece high carbon steel puller for fence repairs at 7-1/2 in.

Pros

  • Drop forged from one piece of high carbon steel
  • Fence repairs named among its uses
  • Also serves as a small hammer, cold chisel, pry-bar, wedge and box opener
  • 7-1/2 in size and 16 ounces stated

Cons

  • No warranty is stated in the listing
  • Only 1 item is listed, with no pack option stated
  • No handle material is stated
  • No pack option is listed beyond the single item
Crescent 10in Fence Tool

Crescent 10in Fence Tool

Crescent9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10-inch heavy-duty fence tool pliers that cut wire and pull staples, with an angled head, dipped grips and corrosion-resistant alloy steel.

Pros

  • Wire cutter plus staple puller in one tool
  • Angled head for offset cutting
  • Corrosion-resistant alloy steel with polished head
  • Standard Limited Lifetime warranty stated

Cons

  • 1.7 pounds, the heaviest pick here
  • No hammer head is stated
  • Dipped grips rather than cushioned grips
Bates Choice Fence Pliers

Bates Choice Fence Pliers

Bates Choice9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10.6-inch multifunctional fence tool with a dual-action hammering and pulling head.

Pros

  • 10.6-inch multifunctional design stated
  • Dual-action head for hammering and staple extraction
  • 0.22 inches cutting width stated
  • Cushioned ergonomic grip

Cons

  • Title says 10.8 inches against 10.6-inch in bullets
  • 0.68 kg before any belt or pouch
  • Plastic handle material
  • No warranty term is stated
Bostitch Staple Remover

Bostitch Staple Remover

Bostitch9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

All-metal chrome office staple removers in a pack of 3, with a 7-year limited warranty.

Pros

  • 7-year limited warranty stated
  • Chrome-plated all-metal construction
  • Pack of 3, per the title and bullets
  • Rounded end doubles as a box opener

Cons

  • Listing names office, home and school use, not fence work
  • No fence staple size is stated
  • Flat staples only, per the listing

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

More picks to compare

  • Bates Choice Fencing Pliers 10.8 InchBates Choice Fencing Pliers 10.8 Inch10.8 in fencing pliers with wire cutters, hammer face, staple puller and gripping jaws.Check on Amazon
  • Upholstery Staple Remover 2 PackUpholstery Staple Remover 2 Pack2 pack heavy duty upholstery staple remover tool.Check on Amazon
  • Keyfit Tools Eagle Beak Staple RemoverKeyfit Tools Eagle Beak Staple RemoverEagle beak staple remover for 16, 18 gage 2 in fence staples.Check on Amazon
  • OFCOX Upholstery Staple Remover SetOFCOX Upholstery Staple Remover Set5 piece upholstery staple remover set with tack puller for furniture and carpet.Check on Amazon

Spec comparison

Tool GoatGear Score Type Size Weight Warranty Amazon
Enderes Staple Puller 9.7/10 Drop forged puller 7-1/2 in 16 ounces Not stated View on Amazon
Bostitch Staple Remover 9.5/10 Office remover 1.75 x 2.25 x 8.68 in 2.39 ounces 7-year limited View on Amazon
Bates Choice Multi-Plier 9.6/10 Multi-plier fence tool Not stated Not stated Not stated
Crescent Fence Tool 9.7/10 Fence tool pliers 10-inch Not stated Not stated

These are maker ratings taken from the goat gear listings on 23 October 2026, not our own measurements.

How to choose the best fence staple remover tool

Fence puller or office remover

The job decides the tool. The Enderes listing names fence repairs among its uses, along with removing cotter pins and work as a staple puller, small hammer, cold chisel, pry-bar, box opener and wedge. The Bostitch listing names office, home and school use with flat staples, and does not name fence work. The Bates and Crescent titles name fence tools directly, with nail and staple pulling and wire cutting. For the wider choice between fasteners, see our fence staples vs fence clips guide.

Forged steel against all-metal

Build decides how the tool holds up at the post. The Enderes puller is drop forged from one piece of high carbon steel, at 16 ounces, in black. The Bostitch removers are chrome-plated all-metal, with stainless steel listed as the material type, at 2.39 ounces for the pack listing. The heavier forged puller suits fence staples, while the lighter office remover suits flat staples on paper and board. The Bates and Crescent titles state no material, so their build cannot be compared from the listing data alone.

Tool Type Size Weight
Enderes Drop forged puller 7-1/2 in 16 ounces
Bostitch Office remover 1.75 x 2.25 x 8.68 in 2.39 ounces
Bates Choice Multi-plier fence tool Not stated Not stated
Crescent Fence tool pliers 10-inch Not stated

Size, weight and reach

Size and weight change how the tool feels on a long fence line. The Enderes puller measures 7-1/2 in and weighs 16 ounces, a compact forged tool for one-handed pulling. The Crescent pliers measure 10-inch, longer than the Enderes puller. The Bostitch listing gives dimensions of 1.75 x 2.25 x 8.68 inches and a weight of 2.39 ounces. The Bates title gives no size or weight, so it cannot be placed on size from the listing data alone.

Multi-use tools for fence work

Several picks cover more than staple pulling. The Enderes listing adds a small hammer, cold chisel, pry-bar, wedge and box opener to its staple pulling and fence repair uses. The Bostitch rounded end doubles as a box opener. The Crescent title adds a wire cutter to its staple puller, and the Bates title adds a nail puller. A tool that also cuts wire or pulls nails saves a trip back to the barn. For staple gun choices, see our hand vs electric staple gun guide and our best flat top fence staples guide.

Pack size and spares

Pack size matters when staples fight back and a tool wears out. The Bostitch listing gives a pack of 3 removers, so a spare stays in the barn while one remover works the fence line. The Enderes listing gives a single item, with no pack option stated, so the one forged puller must cover every job. The more picks add pack options of their own: a 2 pack upholstery remover and a 5 piece remover set, plus the Bates fencing pliers and the Keyfit beak remover for fence staples. A pack of 3 office removers still does not replace a forged fence puller, so match the pack to the job, not just the count.

Around the Barn

  • Use the Enderes puller for fence repairs, cotter pins and prying, as the listing directs.
  • Keep the Bostitch removers for flat staples at home, in the office or at school.
  • Keep the Crescent pliers ready for wire cutting and staple pulling on the fence line.
  • Use the Bates multi-plier for nail pulling and staple pulling on fence jobs.

FAQs from goat keepers

Which pick is made for fence repairs?

The Enderes listing names fence repairs among its uses, along with staple pulling, cotter pin removal, a small hammer, a cold chisel, a pry-bar, a box opener and a wedge.

How does the Enderes puller differ from the Bostitch remover?

The Enderes puller is a drop forged, one-piece high carbon steel tool at 7-1/2 in and 16 ounces, made for fence work. The Bostitch remover is a chrome-plated all-metal office tool in a pack of 3, for flat staples, with a 7-year limited warranty.

Do any of these tools state a warranty?

Only the Bostitch listing states a warranty term, a 7-year limited warranty. The Enderes listing states no warranty, and the Bates and Crescent titles state no warranty term.

How heavy are these tools?

The Enderes puller weighs 16 ounces and the Bostitch listing weighs 2.39 ounces. The Bates and Crescent titles state no weight.

What other jobs do these tools cover?

The Enderes listing covers a small hammer, cold chisel, pry-bar, wedge and box opener. The Bostitch rounded end doubles as a box opener, the Crescent title adds a wire cutter, and the Bates title adds a nail puller.

What staple sizes do these tools cover?

The pick listings state no staple size. The Keyfit more pick lists 16, 18 gage 2 in fence staples, so staple size must come from the more picks or from a separate staple listing, not from the four picks here.

Enderes Staple Puller
Still deciding? Our top pickEnderes Staple Puller
Check price on Amazon

Behind the Farm Score

The GoatGear Score weighs performance, build, value, safety and warranty. For staple removers, safety means sturdy one-piece or all-metal construction with no loose parts. Only the Bostitch listing states a warranty term, so warranty adds nothing to the other scores. How we pick explains the weights.

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Enderes Staple Puller 9.7 32 22 21 n/a 0
Bostitch Staple Remover 9.5 23 20 18 n/a 3

A score of 9.2 marks the weakest point total on our scale and 9.8 the strongest; totals in between are placed proportionally. No power and no stated safety feature means no safety row: the score is then out of 90 points.

More from the barn

See every goat fencing guide and all fencing and shelter guides. Also see our fence staples vs fence clips and best flat top fence staples.

More picks: browse fencing and shelter gear, goat fencing and hand vs electric staple gun.