Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Drive a Fence Post Into the Ground

How to drive a fence post into the ground: pick the right driver, fit the sleeve to the post, set the post straight and drive it down in stages.

How to Drive a Fence Post Into the Ground
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sekcen Fence Post Anchor Ground SpikeSekcen Fence Post Anchor Ground Spike9.6/10View on Amazon
  2. 2BTRAM Heavy Duty Fence Post Anchor Ground SpikeBTRAM Heavy Duty Fence Post Anchor Ground Spike9.5/10View on Amazon
  3. 3Pisman Ground Rod and T-Post DriverPisman Ground Rod and T-Post Driver9.6/10View on Amazon
  4. 4VEVOR Wooden Garden StakesVEVOR Wooden Garden StakesView on Amazon
  5. 5Toriexon 30 PCS Electric Fence PostsToriexon 30 PCS Electric Fence PostsView on Amazon
  6. 6Toriexon 50 PCS Electric Fence PostsToriexon 50 PCS Electric Fence PostsView on Amazon
  7. 7Toriexon 80 PCS Electric Fence PostsToriexon 80 PCS Electric Fence PostsView on Amazon
  8. 8Heavy Duty Steel Fence Post Repair StakesHeavy Duty Steel Fence Post Repair StakesView on Amazon
  9. 950 Pack 48'' Plastic Step-in Electric Fence Posts50 Pack 48'' Plastic Step-in Electric Fence PostsView on Amazon

A goat leaning on a fence line will find the one post that leans, and a leaning post usually starts with a post that was never driven straight. How to drive a fence post into the ground comes down to picking a driver that fits the post, setting the post plumb, and driving it down in short stages while checking it stays straight. This guide walks through those steps with gas-powered T-post drivers and a jackhammer collar system, using the figures the listings state.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

How to drive a fence post into the ground: the short answer

Mark the fence line and the spot for each post, then match the driver to the post: gas drivers in the listings state sleeves from 45 mm to 100 mm, and a collar system fits T-posts from 0.83 lb/ft to 1.5 lb/ft. Set the post on its mark, hold it plumb, and drive it down in short stages, lifting the driver clear between stages to check the post still stands straight. When the post sits at the depth the fence needs, brace it and move to the next mark.

Pick the driver for the post

The driver does the work, so match it to the post and the ground. Gas T-post drivers in the listings run from a 32.6cc engine at 900W to a 52cc engine at 1900W, with impact energy from 20J to 60J across the listings. A jackhammer collar system runs on 120 Volt power at 1700 Watt and 1900 BPM, and it stays on the ground while it drives, since the listing states it never has to be lifted over the head.

Driver Stated power Impact Weight stated Sleeves or fit
JKCHEN PRO 52cc gas driver 1900W, 6500RPM 55J 42.0 pounds 49, 69 and 100 mm sleeves
HENHAIY 32.6cc gas driver 900W, 8500r/min 20 to 45J 28.66 pounds Not stated
HIGOSPRO 37.7cc gas driver, 2 sleeves 1200W, 8500RPM 35J 15.4 pounds 55 and 70 mm sleeves
HIGOSPRO 37.7cc gas driver, 3 sleeves 1200W, 8500RPM 35J 15.4 pounds 45, 55 and 88 mm sleeves
Generic jackhammer system 1700 Watt, 120 Volt 60 Joule, 1900 BPM 49.5 pounds Collar fits 0.83 to 1.5 lb/ft T-posts

Gas T-post drivers

Gas drivers carry their own engine, so they work away from power. The JKCHEN PRO driver (on Amazon) lists a 52cc 2-stroke engine at 1900W and 6500RPM, with 55J of impact and 3 sleeves of 49, 69 and 100 mm. The HENHAIY driver (on Amazon) lists a 32.6cc 2-stroke engine at 900W, with impact energy of 20 to 45J and an impact frequency of 1200 to 2200r/min. The HIGOSPRO drivers list a 37.7cc 4-stroke engine at 1200W and 8500RPM, with 35J of impact energy. Gas drivers need fuel mixed or added before work: the JKCHEN PRO listing states a 25:1 gas/oil mix, a 1.3L fuel tank and 0.6L/h consumption, while the HIGOSPRO listing states 0.65L of fuel capacity.

Jackhammer collar systems

The Generic system (on Amazon) pairs a jackhammer with a collar and bit, and the listing states it is the only powered T-post driver that never has to be lifted over the head. The jackhammer lists 120 Volt, 1700 Watt, 14.2 amp draw, 1900 BPM and 60 Joule of impact energy, with a 30mm hex shank. The collar fits all gauges of T-post from light-duty 0.83lb/ft to heavy-duty 1.5lb/ft, as well as Y-posts with teeth. The system comes with a 4-oz bottle of jackhammer oil, a tool kit, and the collar and bit, all in a plastic box inside a cardboard box.

Hand drivers

A hand driver is a tube with handles that slides over the post, and it needs no fuel and no power. None of the listings in this guide is a hand driver, so this guide states no weight or size figure for one. For posts in soft ground and short runs, a hand driver keeps the work simple; for long runs and hard ground, the gas drivers and the jackhammer system do the heavy work. The easy install fence posts guide compares gas and hand drivers side by side.

Set the post straight

A straight post starts with a straight mark. Set the post on its mark and hold it plumb before the driver goes on, then drive in short stages and check the post after each stage. If the post starts to lean, pull it and reset it rather than driving a leaning post deeper. The JKCHEN PRO listing states a shock-absorbing rubber-plastic handle, the HIGOSPRO listings state a shock-absorbing rubber handle, and the HENHAIY listing states double handles wrapped with soft sponge, all for a steadier grip while driving. The Generic system states a shock-absorbing, vibration-dampening main handle with a trigger switch for one-handed operation.

Fuel, sleeves and fit

Sleeves and fuel decide whether the driver fits the post and keeps running. The JKCHEN PRO set includes 3 sleeves of 49, 69 and 100 mm, the HIGOSPRO 2-sleeve set includes 55 and 70 mm heads, and the HIGOSPRO 3-sleeve set includes 45, 55 and 88 mm heads. Match the sleeve to the post before driving, since a loose sleeve wastes the impact. The JKCHEN PRO listing states a 25:1 gas/oil mix with a 1.3L tank and 0.6L/h consumption, and the HIGOSPRO listing states 0.65L of fuel capacity with 0.47L/kW·h efficiency. The HENHAIY listing states a 0.23gal translucent fuel tank. The Generic system runs on 120 Volt power, so it needs an outlet or a generator nearby.

Read the listing twice

Driver listings can disagree with themselves, and the HENHAIY listing is the example here. Its title states a 32.6cc engine and 8500r/min, while its bullets state a 32.7cc power drill and an impact frequency of up to 1200-2200r/min. Trust the title figure of 32.6cc and treat the impact frequency with care, since the 2 figures do not agree. The 2 HIGOSPRO listings share the same 37.7cc engine, 1200W and 35J figures, but they are different sets: one includes 55 and 70 mm sleeves, and the other includes 45, 55 and 88 mm sleeves, so check the sleeve list before ordering. The JKCHEN PRO listing states a 1 Year warranty, and the HIGOSPRO listings state a 1-year warranty.

What this guide does not cover

This guide covers driving hardware only. It does not cover fence layout, wire tension or any health question. Ask your local extension office about fence plans and goat fencing.

FAQs from goat keepers

Can a gas T-post driver drive a wood post?

Yes, according to the listings. The HIGOSPRO listings state the driver works with all standard T-posts, metal and wood, and the JKCHEN PRO listing states it suits metal and wood posts in any terrain.

What size sleeve does a T-post driver need?

Match the sleeve to the post. The JKCHEN PRO set includes 49, 69 and 100 mm sleeves, the HIGOSPRO sets include 55 and 70 mm or 45, 55 and 88 mm sleeves, and the Generic collar fits T-posts from 0.83lb/ft to 1.5lb/ft.

How heavy is a gas T-post driver?

The HIGOSPRO drivers weigh 15.4 lb, the HENHAIY driver weighs 28.66 lb and the JKCHEN PRO driver weighs 42.0 lb. The Generic jackhammer system weighs 49.5 lb, so check the carry before you choose.

Will a T-post driver work in rock or concrete?

No. The Generic listing states it will not drive posts through solid rock or concrete, so set those posts another way.

What fuel mix does a gas T-post driver use?

The JKCHEN PRO listing states a 25:1 gas/oil mix, a 1.3L fuel tank and 0.6L/h consumption. The HIGOSPRO listing states 0.65L of fuel capacity, and the HENHAIY listing states a 0.23gal fuel tank.

More from the barn

See every goat fencing guide and all fencing and shelter guides.

More picks: easy install fence posts, post hole digger tips, how to dig a fence post hole and manual fence post puller.